Introduction

Welcome! My name is Daniel Lim Jhao Jian. Here is where I share my experience, knowledge and ideas. You are welcome to leave comments and follow my blog. You are free to copy anything from this blog. Please recommend this blog to your friends.


Saturday, 6 September 2014

Tips for CIE AS and A Level Physics

I got 4A for my AS Level in October 2013 and 4A* for my A Level in May 2014. One of the 4 subjects I took was Physics. My percentage uniform mark for Physics was 93% in AS Level and 95% in A Level. Do you want to know how to score in AS and A Level for Physics? Here, I am posting the complete tips for AS and A Level Physics. These tips are intended for students who are sitting for AS or A Level in 2016, 2017 or 2018.

Tips for other CIE AS and A Level subjects can be found here:
http://daniellimjj.blogspot.com/2014/09/complete-tips-for-cie-as-and-level.html


1. Studying tips
- When your teacher is teaching in class, pay attention to what your teacher says. Make sure you understand everything taught by your teacher. If you do not understand anything, ask your teacher or friends.
- You need notes or reference books that are complete. I recommend you to use my notes. You can download my notes here:
http://daniellimjj.blogspot.com/2014/06/full-notes-for-cambridge-international.html
- When studying a chapter, read through all the explanations in my notes or in the reference book sentence by sentence. Make sure that you truly understand each sentence before moving on to the next sentence. You also need to know and understand all formulas. Certain topics may require understanding of earlier topics, so make sure you understand those topics. You should also try to relate them to what your teacher had taught in college or school.
- You should be actively involved in all experiments carried out in college or school because this can help improve your practical skills which are essential for Paper 3 and Paper 5.
- Then, you have to remember everything that you understood. You can memorise the sentences in my notes or in the reference book, or you can also create your own sentences that have the same meaning and memorise them. If you create your own sentences, make sure that you do not change the original meaning, do not leave out any important points and do not change the important keywords and scientific terms. However, do not just memorise without understanding. Once you have understood, it will be quite easy to remember and you will be unlikely to forget any of the points.
- For certain facts, there may be no explanation for them so it is not possible to understand them. In that case, you have to remember and memorise those facts.
- For the calculations, you need to know how to apply what you have learnt and use the correct formula to solve the questions. Go through all the example questions in my notes or in the reference book. Make sure that you understand how every question is solved.
- You have to regularly revise every topics again and again. When revising, go through all the explanation, facts and examples for calculation questions in my notes or in the reference book. Make sure that you do not forget anything that you have understood previously. Regular and repeated revision will help you to remember all the explanation and facts for a long time.
- When you have understood all topics, you have to do past year A Level questions. After doing the questions, refer to the mark scheme and do self marking. Past year questions and mark schemes are available here:
http://daniellimjj.blogspot.my/2014/02/cie-octnov-2013-question-papers-and.html
- You should understand how the mark schemes are used. In the mark schemes for Physics, there are 4 types of marks, which are M, C, A and B. The A marks are always dependent on the M marks, which means that A marks can only be scored if the M marks are also scored. If a question does not have M mark, then the A mark can be scored on its own. C marks are automatically scored if the subsequent M or A mark is scored, even if the points for the C marks are not written down, but if the subsequent M or A mark is not scored, then the points for the C marks must be written down in order for the C marks to be scored. On the other hand, B marks are independent of any other marks, which means that they can be scored without other marks also being scored. If any Physics term is underlined or highlighted, it means that the exact term must be used in the answer and no other term is acceptable even if the meaning is the same, but grammatical variants of the term is accepted. If any non-Physics term is underlined or highlighted, it means that either the exact term or other terms with the same meaning must be used in the answer. If any words are placed in brackets, it means that the words need not be present in the answer for the mark to be scored. In the mark schemes, A means accept, I means ignore while R means reject.
- When doing revision before exam, you should first go through the subtopics that you think is more difficult or that you may have forgotten. Then, go through other topics as well if possible.
- To prepare for Physics Paper 3 and Paper 5, you should go through all the past year questions and the mark schemes. Find out how every question is marked and which points need to be included in the answers. The pattern of questions set is similar for every year and you should familiarise yourself with the pattern. Usually, the same type of questions will have similar mark scheme, so this can help you when answering exam questions. You should remember the answers for questions that are common.
- For Physics Paper 3, I also suggest that you memorise my list of 20 common answers (see below) for the limitations and suggestions question which appears in the last part of Question 2. My list is based on the mark schemes for past year questions. Usually 3 of the 4 answers required can be found in my list, and the 1st answer in my list can be used for all experiments. Sometimes, only 2 of the 4 answers required can be found in my list, and sometimes, all the 4 answers required can be found in my list. Note that for the parts of the answers in my list that are placed in brackets, it means that you have to write those parts based on the context of the experiment.

The List of Common Answers for the Limitations and Improvements Question of Paper 3 Question 2:

(a) Two/three readings are not enough to make a valid conclusion
- Take more readings and plot a graph
Note: This answer can be used for all experiments

(b) The value of (a physical quantity) is small so the percentage uncertainty of (the quantity) is large
- (The way to make the value of the quantity larger)

(c) The movement/oscillation of (something) is affected by wind movement
- Use a wind shield when carrying out the experiment

(d) Difficult to determine the start and end of oscillation/movement of (something) because it moves too fast
- Use a video camera with slow motion feature and timer to video the experiment with scale, then view the video playback frame by frame.

(e) Difficult to release (something) without applying a force
- Use a mechanical hand to release the (thing)

(f) Difficult to shape the plasticine into the shape of (something)
- Use a mould to shape the plasticine

(g) Heat loss through the sides and bottom of beaker/container
- Use polystyrene container or insulate the beaker/container
Note: This answer should be used for experiments involving the temperature of liquid.

(h) The (measuring instrument) is not precise enough
- Use another (instrument) with greater sensitivity and precision
Note: You should state in your answer the specific degree of precision for the limitation and the improvement.

(i) The length/diameter/thickness of (something) is not uniform
- Measure the length around/along the (thing) and calculate the mean

(j) Difficult to measure (something) due to (specific reason based on experiment)
- (Suggest a better way to measure it)

(k) Parallax error when measuring (something)
- (Suggest a better way to measure it, such as use mirror scale)
Note: This answer should only be used if the measurement is difficult to make and parallax error is very likely to occur.

(l) (Something) moves
- (Way to keep it in the original position)

(m) Oscillation does not occur in one plane only
Note: No possible improvement for this limitation. You should write in your answer the improvement for any other limitation.

(n) Difficult to maintain (something) at (a particular position) / maintain ruler vertical
- Use a clamp

(o) Difficult to zero the newton-meter when used horizontally
Note: No possible improvement for this limitation. You should write in your answer the improvement for any other limitation.

(p) Friction at pulley
- Apply oil to lubricate the pulley

(q) Resistance of contacts
- Clean the contacts
Note: This answer should be used for electric experiments.

(r) Difficult to determine when (something) reach the maximum height because it remains there for too short a time
(s) Difficult to take the reading of newton-meter immediately when (something) starts to move
because it moves suddenly
(t) Difficult to start or stop the stopwatch immediately when (something) passes through (somewhere)
- Use a video camera with slow motion feature and (the measuring device) to video the experiment with scale, then view the video playback frame by frame.
Note: The same improvement can be used for limitations r, s and t.

2. Paper 1
- Read the question and all the options carefully. Write any rough workings on the question paper if you need to. Cancel off the options that you consider as definitely wrong. Then, choose the most suitable answer among the options.

3. Paper 2 and Paper 4
- When answering, read the question and all information given carefully. Make sure that you know what the question is asking for. Answer the questions based on your knowledge and understanding on the relevant topic in Physics. Certain questions may test you on more than one topics. For some questions, you may have to apply what you have learnt in Physics in order to answer them. You have to think carefully and relate the question to what you have learnt. You may also be asked to give your own opinions.
- When writing your answer, you can use the same or similar words or sentences as those in my notes or in the reference books if possible. However, sometimes you may need to make some changes in order to suit the question. You can also answer in your own sentences that have the same meaning. If the question asks on something that is not in my notes and the reference books (the question requires you to apply what you have learnt in Physics or give your own opinion), then you have to answer in your own sentences. For all questions, your answer must be specific and not too general. Give the most suitable answer according to the question.
- You should use the correct Physics terms in your answer. Do not replace them with other terms that are inappropriate, even if their meaning are the same. You should spell all Physics terms correctly. If you can't do so, try to spell it in such a way where it sounds the same as the actual term when read out. Marks are usually not deducted for spelling errors in Physics terms as long as it still sounds the same and that it is not easily confused with other terms. If you spell a non-Physics term wrongly or if you make grammatical errors in your answer, marks will not be deducted for as long as the examiner can understand what you are writing. You are allowed to use suitable short forms in your answer, especially for representing physical quantities or their units.
- It is not compulsory to answer in continuous writing form. You are allowed to answer in table form, point form or other suitable forms. In suitable cases, you can also use diagrams, equations or graphs in your answer.
- When answering questions on calculation, you should show all workings. You should not skip any important steps. You must also write the correct unit for the final answer if it is not provided. You are advised to write down the formula used to solve the question, even though it is not compulsory to do so. The number of marks allocated for the question usually shows the amount of working needed. 1 mark will be given for each important step and the final answer. In some cases, if your final answer is correct, full marks will be given and the workings will not be marked. In other cases, marks can only be given for the final answer if the marks for working are scored, where correct answer without working scores 0 mark. Whichever case, if your final answer is wrong but some of your working is correct, you may still be given some marks. You are not allowed to write extra solutions or answers. If you do so and any of the answers or solutions is wrong, marks will be deducted. When copying figures from the question or from your answer for the previous part of the question, be careful not to copy wrongly. For a calculation question which requires you to use your answer from the previous question, even if your answer for the previous question is wrong and you use it for this question causing your answer for this question to be wrong, usually you will still get full marks for this question as long as your calculation for this question is correct. This is known as 'error carried forward'. For questions on 'show', 'prove', 'derive' or similar, usually marks are only given for the workings, not the answer, so it is important that you show complete workings, and explain your workings if necessary.
- Usually, you should give the final answer to 3 significant figures. Do not write your final answer as a fraction or in surd form. However, if the question asks you to give your answer to a specific number of significant figures, then you must follow the instruction, or if the question states that you must give your answer to a suitable number of significant figures, then the number of significant figures of your answer should be equal to the number of significant figures of the raw value used in the calculation with the least number of significant figures.
- When answering questions which requires you to give an answer as well as an explanation to your answer, such as questions that say 'State and explain', 'Suggest and explain' or something similar, it is very important that you give a complete and clear explanation. Marks can only be given for the answer if the marks for explanation are scored. Therefore, correct answer without satisfactory explanation usually scores 0 mark. On the other hand, if your answer is wrong but some of your explanation is correct, you may still be given some marks. In other words, 'explain' is more important than 'state' or 'suggest'.
-  For questions that require explanation or description, your answer must be very detailed. You are advised to answer in complete sentences so that your answer can be easily understood. The number of marks allocated for the question usually shows the number of points needed in your answer. 1 mark is given for each correct point. Some of the marks (A marks) may be dependent on other marks (M marks), which means that they can only be scored if the other marks are also scored. Do not miss out any important points in your answer. You are allowed to write extra points in your answer, but you must be careful not to write any points with wrong facts. Marks will only be given for the correct points. For points that are irrelevant but does not contain wrong facts, no mark will be given or deducted. However, for points that contain wrong facts, marks may be deducted.
- For questions that do not require explanation or description, write the answer straight away. You need not answer in complete sentences. The number of marks allocated for the question usually shows the number of answers needed. If the question states the number of answers you have to write, then you are not allowed to write extra answers. If you do so, marks may not be given for the extra answers, and marks may be deducted if any of them is wrong. If the question does not state the number of answers you have to write, you are allowed to write extra answers, but you must be careful not to write any answer with wrong facts. Marks will only be given for the correct answers. For answers that are irrelevant but does not contain wrong facts, no mark will be given or deducted. However, for answers that contain wrong facts, marks may be deducted.
- When drawing diagrams, make sure that all important details are included in the diagram you draw. You have to label correctly all parts in the diagram. Your diagram should be clear and neat.

4. Paper 3
- During the test, read the question and all information given carefully. Make sure that you understand the experiment given. Certain parts of the question require you to record the readings from the experiment in a table. You should draw the tables before carrying out the experiment so that you can record your readings in the table straight away during the experiment. Then, carry out the experiment by following the steps given in the question exactly. You need to apply your Physics practical skills when carrying out the experiment.
- Certain questions may require your knowledge and understanding in Physics to answer them. You may also need to give your own opinions. Your answer must be specific and not too general. Give the most suitable answer according to the question.
- When recording readings from an measuring instrument (except metre rule, vernier calipers and micrometre screw gauge), the number of decimal places used should be equal to half of the smallest division of scale of the instrument (For example, if the instrument's smallest division of scale is 0.1, you should record the reading to the nearest 0.05, which is 2 decimal places.) For digital instruments (except digital stopwatch), the number of decimal places used should be the same as that shown on the display. The reading should be recorded to the nearest 0.1cm for metre rule, 0.01cm for vernier calipers, 0.01mm for micrometer screw gauge and 0.1s for stopwatch (both analogue and digital). In all cases, do not give more or less number of decimal places. You must also write the correct units.
- In most cases, you should take each reading twice, then calculate and record the mean of the 2 readings. Ensure that you show in your answer both readings and the calculation of their mean. However, for the part in Question 1 which requires you to record readings in a table, questions that carry only 1 mark and questions which states that repeated readings are not required, you only need to take each reading once and record it straight away.
- When plotting graph, draw both the horizontal and vertical axis on the graph paper correctly. Label both axis correctly and state the unit (if any). Use a suitable scale for both axis and do not use any odd scales such as 3:10. Both the x-axis and y-axis need not start from 0. The scales should be chosen such that the points plotted on graph cover at least half of the graph paper. The markings on the scales should not be more than 3 large squares apart. Plot all points on the graph accurately. The points should be accurate to half a small square. For all the points, their diameter should not be larger than half a small square. Then, draw the correct straight line or curve. When drawing the straight line or curve, it should pass through all points on the graph if possible. If this is not possible, the line or curve should pass through as many points on the graph as possible, all the points should be close to it and the number of points above and below the line or curve should be almost equal.
- When determining the gradient of the line of graph, choose 2 points on the line and draw a triangle. The distance between the 2 points chosen should be at least half the length of the line. When determining the y-intercept of the line of graph, if the x-axis starts from 0, you can read it off directly from the y-axis of graph, or if the x-axis does not start from 0, you should choose a point on the line, preferably one of the points that you used to calculate its gradient, and substitute its x and y values as well as the gradient into the equation y=mx+c to determine the value of c which is the y-intercept.
- For any questions involving calculation, the number of significant figures of your answer should be equal to or one more than the number of significant figures of the raw value used in the calculation with the least number of significant figures. You should show all workings and do not skip any important steps. You must also write the correct unit for the final answer if it is not provided. You are not allowed to write extra solutions or answers. If you do so and any of the answers or solutions is wrong, marks will be deducted. For a calculation question which requires you to use your answer from the previous question, even if your answer for the previous question is wrong and you use it for this question causing your answer for this question to be wrong, usually you will still get full marks for this question as long as your calculation for this question is correct. This is known as 'error carried forward'.
- For the part of Question 2 which asks you to estimate the percentage uncertainty in a particular value, in most cases the absolute uncertainty used to calculate the percentage uncertainty should be equal to twice the smallest division of scale of the instrument used to measure the value (For both analogue and digital stopwatch, the absolute uncertainty used should be 0.2s). This is because the measurement for this part is often difficult to be done accurately.
- For the part of Question 2 which asks you whether your results support the suggested relationship between 2 variables, you have to calculate the percentage difference between 2 values of a constant which is obtained in previous part of the question. The suggested relationship is supported if the percentage difference is 5% or less and not supported if the percentage difference is more than 5%.
- For the last part of Question 2 which is about limitations and improvements, I would suggest that you use answers from my list of 20 common answers (see above) that you memorised. The 1st answer in my list can be used for all experiments, so you should always use it. You should also choose other answers from my list which are relevant to the experiment. You may have to give 1 or sometimes 2 other relevant answers that are not in my list since usually not all the 4 answers required can be found in my list. You are not allowed to write more than 4 answers. If you do so, marks may not be given for the extra answers, and marks may be deducted if any of them is wrong.
- For all questions, you should use the correct experimental and Physics terms in your answer. Do not replace them with other terms that are inappropriate, even if their meaning are the same. You should spell all experimental and Physics terms correctly. If you can't do so, try to spell it in such a way where it sounds the same as the actual term when read out. Marks are usually not deducted for spelling errors in experimental and Physics terms as long as it still sounds the same and that it is not easily confused with other terms. If you spell other terms wrongly or if you make grammatical errors in your answer, marks will not be deducted for as long as the examiner can understand what you are writing. You are allowed to use suitable short forms in your answer, especially for representing physical quantities or their units.

5. Paper 5 Question 1 (Planning Experiment)
- When answering, read the question given carefully. You have to design a suitable experiment based on the question, either to test whether the suggested relationship between 2 variables is valid or to determine the value of a constant. Your answer must include independent variable, dependent variable, variables to be kept constant, diagram of set-up apparatus, procedure, data analysis, safety precautions and additional details.
- For the independent variable and dependent variable, they can be obtained easily from the question itself and you should give one of each. For the variables to be kept constant, there is often more than one and you should give all of them that you can think of. Note that the term 'kept constant' or 'keep constant' must be used in your answer and no other terms are acceptable. You need not answer in complete sentences.
- For the diagram of set-up apparatus, show all the apparatus and material used in the experiment and label them correctly. If a diagram is provided by the question, you can use the same diagram, but it is usually not complete and you have to add other apparatus or materials to it.
- When writing the procedure, you must include the steps to measure the manipulated variable, responding variable and every variable to be kept constant. For each measurement, you should state the method and apparatus used. For some variables, you may have to measure other quantities in order to calculate them. You are advised to answer in complete sentences so that your answer can be easily understood. You should also include other steps required to set up the apparatus if you did not show them in the diagram.
- For the analysis of data, you should explain how a suitable graph should be plotted that enables you to test whether the suggested relationship between the 2 variables is valid or to determine the value of the constant. Sometimes, the graph may be a log-log graph or ln-ln graph. You should also show a sketch of the graph. Then, explain how to determine whether the suggested relationship is valid or to determine the value of the constant based on the graph. This often involves the gradient, y-intercept and rearranging of equation.
- For the safety precaution, you should state at least 2 potential safety hazards when carrying out the experiment and the ways to avoid each of them.
- For the additional details, 4 marks will be given and examples of them are how variables are kept constant, calibration of the measuring instruments and additional steps to improve the accuracy and reliability. You may have already stated some of them in other parts of your answer and it is not compulsory to write them again in this part. In this section, you should state the additional details that are not stated in other parts of your answer.
- For all parts of the question, you are allowed to write extra points in your answer, but you must be careful not to write any points with wrong facts. Marks will only be given for the correct points. For points that are irrelevant but does not contain wrong facts, no mark will be given or deducted. However, for points that contain wrong facts, marks may be deducted.
- You should use the correct experimental and Physics terms in your answer. Do not replace them with other terms that are inappropriate, even if their meaning are the same. You should spell all experimental and Physics terms correctly. If you can't do so, try to spell it in such a way where it sounds the same as the actual term when read out. Marks are usually not deducted for spelling errors in experimental and Physics terms as long as it still sounds the same and that it is not easily confused with other terms. If you spell other terms wrongly or if you make grammatical errors in your answer, marks will not be deducted for as long as the examiner can understand what you are writing. You are allowed to use suitable short forms in your answer, especially for representing physical quantities or their units.

6. Paper 5 Question 2 (Analysis, Conclusions and Evaluation)
- When answering, read the question and all information given carefully. Make sure that you understand the experiment given and know what the question is asking for. Answer the questions based on the experiment and its observations and results. You may need to apply your Physics experimental skills to answer some questions. Certain questions may require your knowledge and understanding in Physics to answer them.
- For the graph, plot all points on the graph accurately. The points should be accurate to half a small square. Then, draw the error bars based on the uncertainties of the values given in the question. After that, draw line of best fit. The line should pass through as many points on the graph as possible, all the points should be close to it and the number of points above and below the line should be almost equal. Next, draw the worst acceptable line. It should be either the steepest possible line which passes from the top of top error bar to the bottom of bottom error bar or or the shallowest possible line which passes from the bottom of top error bar to top of bottom error bar. The line must also pass through all error bars.
- When determining the gradient of line of best fit, choose 2 points on the line and draw a triangle. The distance between the 2 points chosen should be at least half the length of the line. For the uncertainty in gradient, you should also determine the gradient of worst acceptable line using the same method. The uncertainty in gradient is equal to the difference between the 2 gradients.
- When determining the y-intercept of line of best fit, usually you cannot read it off directly from the y-axis of graph since the x-axis does not start from 0. Instead, you should choose a point on the line, preferably one of the points that you used to calculate its gradient, and substitute its x and y values as well as the gradient into the equation y=mx+c to determine the value of c which is the y-intercept. For the uncertainty in y-intercept, you should also determine the y-intercept of worst acceptable line using the same method. The uncertainty in y-intercept is equal to the difference between the 2 y-intercepts.
- When calculating the uncertainty in a calculated value, use your knowledge in uncertainties that you learnt in Chapter 2 for AS Level. However, if the calculation is too complicating or if it involves logarithms, there is an alternative method. For this method, you have to determine both the maximum value and minimum value of the calculated value by using the maximum values and/or minimum values of the raw values used in the calculation of the calculated value based on their uncertainties. You have to be very careful to ensure that the maximum value and minimum value you determined are correct. The absolute uncertainty is equal to half of the difference between the maximum and minimum value.
- For any questions involving calculation, the number of significant figures of your answer should be equal to or one more than the number of significant figures of the raw value used in the calculation with the least number of significant figures. For absolute uncertainties, the number of decimal places should be equal to the number of decimal places of the value. You should show all workings and do not skip any important steps. You must also write the correct unit for the final answer if it is not provided. You are not allowed to write extra solutions or answers. If you do so and any of the answers or solutions is wrong, marks will be deducted. For a calculation question which requires you to use your answer from the previous question, even if your answer for the previous question is wrong and you use it for this question causing your answer for this question to be wrong, usually you will still get full marks for this question as long as your calculation for this question is correct. This is known as 'error carried forward'.


Tips for other CIE AS and A Level subjects can be found here:
http://daniellimjj.blogspot.com/2014/09/complete-tips-for-cie-as-and-level.html

77 comments:

  1. Did you have any notes on A level Practicals, It would be highly appreciated by many as this is one of those things that is not properly available on internet

    ReplyDelete
    Replies
    1. You do not need notes for Physics and Chemistry practical since it tests on your practical skills rather than knowledge. You just need to master the answering techniques. Please refer to the tips that I have written.
      For Biology practical, the only notes you need is for the Statistics in Biology at A2 Level. I have included the notes for this together with the notes for all other Biology topics. You can download my notes.

      Delete
    2. Hello,

      I am writing to ask about the precision of voltmeters and ammeters. I thought all measurements given by those 2 devices had to be written to 0.01 accuracy. Yet, in Paper 35, May June 2010, they specify that voltmeter readings must be to the nearest 0.1V.

      What should I do?

      Thank you

      Delete
  2. Hi,

    Is it important to be actively involved in co-curricular activities? I myself wasn't that active and can be considered as inactive in it but on the other hand, I'm good at my studies and have been forecasted to be a str8 A+ scorer. Any ideas from your experiences? Your reply will be appreciated. Thank you.

    ReplyDelete
    Replies
    1. I never took part in any co-curricular activities during secondary school, except that I did join some Mathematics competitions. I still got 6.96/10 for my co-curriculum marks because my school assumed that every one had full attendance for the activities. Co-curricular activities are only important if you are aiming to study Matrikulasi and in local public universities (IPTA). Otherwise, it is not important and you don't have to take part in it.

      Delete
  3. How many marks will be lost if I don't write in 3 significant figures for AS physics?

    ReplyDelete
    Replies
    1. You will only lose 1 mark throughout the entire paper, no matter how many times you make this mistake.

      Delete
  4. Thank you so much for creating this site, I really do appreciate your work. It's a shame I found this after my paper 2 for AS

    ReplyDelete
  5. i cant open your notes once i downloaded it . ( zip folder ) . Do you have pdf version ?

    ReplyDelete
  6. hi i am really struggling badly in physics paper 1 can you please help me in any way possible my exams is in october
    thank you

    ReplyDelete
  7. Hi, thank you for creating this website. I'd like to ask, is it really safe to place answers as 3 s.f. if nothing is specified in the question paper? Because usually when I do this, I notice the mark scheme gives it to 2 s.f. instead.

    ReplyDelete
    Replies
    1. Actually, if nothing is specified, the number of s.f. of your answer should be equal to or one more than the number of s.f. of the raw value used in the calculation with the least number of s.f. However, using this rule to determine the number of s.f. of your answer for every question wastes a lot of time. In most cases, 3 s.f. will be appropriate based on this rule (because the raw values are often given to 2 or 3 s.f.). Even if 3 s.f. is not appropriate and the examiner penalises you, you will only be deducted a maximum of 1 mark throughout the entire paper (If you make this mistake for all questions in the paper, you will still be deducted a total of only 1 mark, because it is CIE's policy to not penalise s.f. mistakes more than once). That is why I recommend giving all answers to 3 s.f. My teacher recommends the same too. It is better to just lose 1 mark for the whole paper than to waste time on this, considering the fact that it is often difficult to complete all questions in the examination within the time given. But please note that this is only true for Paper 2 and 4. You must follow the rules of s.f. strictly for Paper 3 and 5.

      Delete
  8. Hey Dan!

    Thanks for putting up this extensive and very useful set of resources together. I'm doing the October/November series for 2015 and I'm sure I can put some of these notes to good use! :)

    ReplyDelete
  9. thank you for this resource, there arent many out there

    ReplyDelete
  10. Hi. Hope you're doing good. I've read your tips about paper 3 .They're very helpfull.
    I've appeared for physics exam in Oct/Nov 2016. There were 8 questions in paper 2. Due to lack of time mamanagement I was unable to complete different parts of 3 or 4 questions. The parts I left were equal to like 1 or 2 question.
    Paper 1 and paper 3 are remaining. Now at this time what should I do to score good in my exams to improve overall grade. ?
    And how should paper 2 can affect my overall grade?

    ReplyDelete
  11. Sorry. It's oct/nov 2015 not 2016.

    ReplyDelete
  12. how can i calculate the absolute uncertainties in paper 5 question 2

    ReplyDelete
  13. Dow=es cie acutally apply thresholds?They seem low

    ReplyDelete
    Replies
    1. CIE actually applies the grade thresholds, although they are really quite low. I had the same thoughts as you when I saw the thresholds for the first time.

      Delete
    2. I have AS in a couple of days and I'm nervous. Is it okay to loose about marks in each paper? How did you do in mocks?

      Delete
    3. This comment has been removed by the author.

      Delete
  14. Can I score A* in A-level overall from B in AS level? I secured 77 in Mathematics and Chemistry.

    ReplyDelete
    Replies
    1. Unfortunately, it is not possible for you to get A* in overall A level, unless you retake your AS.

      Delete
  15. Can I get A grade in A level Physics?I got a grade B in As level.

    ReplyDelete
    Replies
    1. It is still possible for you to get A in A level, but you need to score much better in A2 compared to AS. Refer to the grade thresholds for the previous years so that you can estimate how many marks you need to get in Paper 4 and 5.

      Delete
  16. Hi, I need your opinion. What did you do back in your day when you were one month away from taking AS Physics? I mean, what sort of exercises would you say is most important to do during this time? Especially for Paper 1 and Paper 2. Is it more of past years? Also do you happen to have the nov 2015 physics AS past papers? Would really appreciate it. Thank you:)

    ReplyDelete
  17. Hi Dan, in IGCSE Chem and Physics I got A's, but my exams are in a few weeks, and I still haven't studied chemistry at all or physics well enough,you could say I've covered only about 15 to 20% of the content in chemistry, what do you recommend I do? Please help, for the time being I'll only study for papers 2(structured) because I have a full 2 weeks empty before the multiple choice. Any tips on how to study or what to study, I have no problem with cramming.

    ReplyDelete
  18. How much time should a person take to complete Q1 of paper 5?Does it take more time to do Q1 compared to Q2?

    ReplyDelete
  19. what if the graph drawn in paper 3 question 1 goes through the x axis is it wrong

    ReplyDelete
  20. Do you think CIE repeat questions? Our teacher told us to expect 5 years back pastpaper questions.

    ReplyDelete
  21. What is the purpose of specimen paper?

    ReplyDelete
  22. i have an exam in like 2 days and i am not prepared what should i do?

    ReplyDelete
  23. In p5 ques1 can we write ans in points?

    ReplyDelete
    Replies
    1. Yes, you are allowed to answer in point form.

      Delete
  24. The graph and the apparatus diagram from question2 and question 1 are we suppose to draw with pencil or pen for p5 physics 9702

    ReplyDelete
    Replies
    1. you can use pencil

      Delete
    2. Even for the diagram in q1 p5

      Delete
    3. Even for the diagram in q1 p5?

      Delete
  25. i got a D last year in as level physics (55) could you help me and tell if its possible for me to get a minimum B in my a level overall?

    ReplyDelete
  26. For p5 is there any new syllabus added in 2016 or is there anything new that we should know about the syllabus for tomorrows paper?

    ReplyDelete
  27. I just finished my Practical exam. But I screwed up.
    Instead of calculating m sin theta, I calculated y sin theta (under the table heading of m sin theta) and plotted my graph based on those values. The axes were labelled properly as asked in the question. Basically, I used values of y instead of m in the table, which basically means I got my graph, gradient and y-intercept as well as one entire column in the table wrong.
    My question is as follows:
    1. Most mark schemes allot 1 mark for the calculation. I'm fully expecting to lose that mark. But will I lose any more marks for the rest of my table?
    2. Because I miscalculated and used the wrong values for m sin theta for the graph, how many marks will I lose there? Keep in mind, I used the values I wrote down in the table, but said values were miscalculated.
    3. How much should I be looking to score in paper 3 to get an overall percentage uniform mark above 95 (high expectations, I know), if I am likely to score around 58 out of 60 in paper 2 and around 35 out of 40 in paper 1?
    Thanks in advance for any answer. I just want to know what I should be expecting. Also, please excuse any grammatical error in my English. I'm not in the right state of mind right now. Depressed beyond belief.

    ReplyDelete
  28. Also, I wrote the values in the table in pencil. Is that a major issue? The rest of the paper was done in pen. Just the table and its contents in pencil.

    ReplyDelete
    Replies
    1. It is alright to write the values in tables with pencil.

      Delete
  29. How many marks to score a distinction?

    ReplyDelete
  30. Hey,
    great work done. This helped me a lot and I wrote that common answer too in my exam. another article that might be helpful to students is
    physics paper 3 a level tips

    ReplyDelete
  31. Is there any change in grade thresholds due to new syllabus?

    ReplyDelete
    Replies
    1. The grade thresholds are still similar compared to previously.

      Delete
  32. Thanks a tonne for these tips! Tbh my school doesnt have a functioning lab this year. Hence I wont be able to do the practical part in the school. Is it a really major issue for my cie practical physics exam? Like cant I get an A* only by referring to videos, books , common sense ??? I am very well prepared for the theory but I really need to ace my practicals too and score an A*

    ReplyDelete
    Replies
    1. You don't actually need to do practical work to prepare for Paper 5. Doing past year questions and referring to the mark schemes would be enough.

      However, practical work is very important for Paper 3. You will need practical skills to properly carry out the experiments and get the results. I suggest that you look at the past year questions for Paper 3 and think whether or not you are able to carry out every experiment. If you are confident that you can, then it should be okay. If not, you have to make alternative arrangement that enables you to do practical work (such as by moving to another school or by attending special sessions for practical).

      Delete
    2. I am so sorry to bother you but like cie has a pattern when it comes to practical papers.many of the topics and content are similar if we check in the past papers. Is it the same for paper 3 too? Like would it be sufficient if I do titration, crystallization related experiments, finiding the reagents etc and other topics, is it like paper 5 that we see a similar trend ?? So that atleast I could do these experiments by following a trend like paper 5, ace it and score an A*. Or is the paper 3 always completely different and random??

      Delete
  33. Hello there,
    Luckily,I found your blog just in time for my oct/nov 2k16 exams.
    I'm so grateful to you for having created this site.
    I've benefited a lot from the notes and tips you have provided on your channel.
    Just want to say a big thank you for all of this.
    You're a life saver!

    ReplyDelete
  34. I have a question regarding physics practical paper. If the mathematical relationship in q.2 is actually justified but our experimental values does not support the relationship and we have written the conclusion according to our experiment, would any marks be deducted???
    If yes, how many marks?

    ReplyDelete
    Replies
    1. You did the right thing, you must answer the question based on the results you got from your experiment, regardless of whether the mathematical relationship is actually justified or not. However, in your case there may be a problem with the accuracy of your experiment, which may cause you to be deducted 1 or 2 marks.

      Delete
  35. is there any structure for writing paper 5 like first data handeling, then method of data collection,then addition details
    Do we have to write it in an order and paragraphs of we can continue writing all points mixed together
    ???

    ReplyDelete
    Replies
    1. It is better to write the points according to the order. However, you won't be penalised if you mix the points together.

      Delete
  36. The first guide book to prepare for Paper 5 of A level Physics is available now. Check this out:
    https://www.facebook.com/alevelphysicspaper5/

    ReplyDelete
  37. i need notes on communications on physics..

    ReplyDelete
    Replies
    1. Notes for all topics of A Level Physics is available here:
      http://daniellimjj.blogspot.com/2014/06/full-notes-for-cambridge-international.html

      Delete
  38. Dear Daniel,
    Congratulations. Well, I have my A2 Phy in a week and I havn't done well in AS. So could you please help me with some stuffs and do you have a sample solution to Paper 5. It would be grateful.
    Thanks.
    you can email me at: afshanadbi@gmail.com

    ReplyDelete
    Replies
    1. Sorry, but I do not have any sample solutions.

      Delete
  39. Can you please tell me for Paper 5, Question 2, where we need to calculate and write the values in the table, should we make the value and its absolute error to the same number of significant figures or decimal places or it doesn't matter? please need urgent help

    ReplyDelete
    Replies
    1. The absolute error should have the same number of decimal places as the value.

      Delete
    2. So is it ok if I use a mixture of significant figures for my absolute uncertainties in the table? Because for the s.f of values it says "allow mixture",but it doesn't say the same for the error so I am not sure.

      Delete
    3. Yes, the number of significant figures does not have to be the same for every absolute uncertainty.

      Delete
  40. Can you please tell me for Paper 4, to how many significant figures should we write our answers to? 2 or 3? or does it depend for every question?

    ReplyDelete
    Replies
    1. For all questions in Paper 4, you should write your answers to 3 significant figures.

      Delete
  41. how much did you score in your P2 AS Physics ?

    ReplyDelete
  42. This comment has been removed by the author.

    ReplyDelete